Logicube ZX-
Tower™ User’s Manual
24
5: Types of Operations
5.0 Types of Operations
There are nine (9) types of operations available on the ZX-T. The left side of the screen shows
the different operation types that can be set. Detailed information on all of the different
operations and their screens can be found in this section.
1.
DRIVES –
This screen shows the status of all drive bays. Each drive bay will be listed
whether or not there is a drive connected.
2.
WIPE –
This type of operation is used to erase and/or wipe. There are two main settings:
Secure Erase –
Sends a command to the drive instructing it to perform a secure
erase based on the drive manufacturer’s specifications.
Wipe Patterns –
Allows the user to set a specific pattern to use for wiping the
drive. The number of passes is customizable (up to 7 passes) along with the type
of data written for each pass. In addition, a 7-pass DoD wipe can be set with
pre-selected pass values.
Details on the different screens found in the Imaging operation can be found in
Chapter 4: Wipe
.
Summary of Contents for ZX-Tower
Page 11: ......
