Logicube ZClone™ User’s Manual
11
3. Quick Start
Quick Start Guide
The following instructions give a basic overview and steps on how to perform a clone. Details on
each operation, menu, or selection can be found in Chapter 4. Modes of Operation.
Performing a Clone
Follow these steps to perform a clone:
1.
Select
Clone
from the modes of operation on the left side.
2.
Tap the
Mode
icon and select
Drive to Drive, Image to Drive or
Drive to Image
.
3.
Tap the
Master
icon and choose the master drive or repository
image.
4.
Tap the
Settings
icon and select
Clever
or
Mirror
.
5.
Change any of the optional settings (Partition Resize Settings, Mirror
Settings, HPA/DCO, and Verification).
6.
Tap the
Target
icon and select one or more target locations or
select the repository to be used.
7.
Tap the
Start
icon to start the cloning task.
Performing a Wipe
Follow these steps to perform a wipe:
1.
Select
Wipe
from the modes of operation on the left side.
2.
Tap the
Target
icon and select one or more target locations.
3.
Tap the
Settings
icon and choose the type of wipe you would like to
perform (Secure Erase or wipe mode). If wipe mode is selected,
choose the type of wipe mode to perform (DoD or Custom).
4.
Tap
HPA/DCO
to wipe the HPA or DCO area of the drive.
