Ø
Set up channel 2:
Bring the channel switch to the center position.
Now channel 2 is selected.
Cable-system
The normal mode can be activated by switching the switch on the rear side of
the Cable handset.
Ø
Bring the switch to the rightmost position.
Now the normal mode is activated.
Emergency-Drive-Down
With this functions all drives can be driven down slowly.
Infrared-system
Ø
Bring the switch at the receiver to the rightmost position.
Now all drives move slowly to their lower end-position.
Cable-system
Ø
Bring the switch at the rear side of the Cable-handset to the leftmost position.
Now the emergency-drive-down is activated.
Attention:
The emergency-drive-down only works, if no mains voltage is
applied to the system! Also a battery have to be connected to the
bed-control-system!
- 27 -
