DMUI-HSM - MANUAL // PAGE 16
9 ADDITIONAL INFORMATION
9.1 DISASSEMBLY
To disassemble the DMUI-HSM Handset, ensure that it has been disconnected from the Power Unit. Then,
follow the assembly instructions for your chosen product in reverse order.
9.2 MAINTENANCE
The DMUI-HSM is maintenance-free for its entire service lifetime.
WARNING Risk of death or serious injury through electric shocks and other hazards
Using a DMUI-HSM Handset alongside unauthorized spare or accessory parts may lead
to death or serious injury through electric shocks and other hazards.
• Only use accessory parts produced or approved by LOGICDATA
• Only use replacement parts produced or approved by LOGICDATA
• Only allow Skilled Persons to perform repairs or install accessory parts
• Contact customer services immediately if the system malfunctions
The use of unauthorized spare or accessory parts may cause system damage. Warranty
claims are void in this scenario.
9.2.1 CLEANING
1. Disconnect the system from the Power Unit
2. Wait 30 seconds for residual voltage to dissipate.
3. Wipe the surface of the Handset with a dry or slightly damp soft cloth. Never immerse the
Handset into liquid
4. Wait for the Handset to dry completely
5. Reconnect the Power Unit
9.3 TROUBLESHOOTING
A list of common problems and their solutions can be found in the DYNAMIC MOTION System Manual.
Most errors with DMUI-HSM Handsets occur when the Control Panel is touched during calibration. Such
errors can be avoided by waiting for 10 seconds to use the Control Panel after start-up. If your DMUI-HSM
Handset is not functioning, a reset may be required. To reset, proceed as follows:
1. Unplug the DMUI-HSM Handset from the Power Unit.
2. Wait for 10 seconds.
3. Plug the DMUI-HSM Handset back to the motor Power Unit
4. Wait for 10 seconds.
▸ The DMUI-HSM Handset is ready for operation.
9.4 DISPOSAL
All products in the DM System are subject to the WEEE Directive 2012/19/EU.
• Dispose of all components separately from household waste. Use designated collection
points or disposal companies authorized for this purpose
