DMUI-EASY2MOVE - OPERATING MANUAL // PAGE 6
2 SAFETY
2.1 TARGET AUDIENCE
This Operating Manual is intended for Skilled Persons only. Refer to
Chapter 2.8 Skilled Persons on page 9 to
ensure that personnel meet all requirements.
2.2 GENERAL SAFETY REGULATIONS
In general, the following safety regulations and obligations apply when handling the product:
• Do not operate the product unless it is in a clean and perfect condition
• Do not remove, change, bridge, or bypass any protection, safety, or monitoring equipment
• Do not convert or modify any components without written approval from LOGICDATA
• In the event of malfunction or damage, faulty components must be replaced immediately
• Unauthorized repairs are prohibited
• Do not attempt to replace hardware unless the product is in a de-energized state
• Only Skilled Persons are allowed to work with DMUI-EASY2move Handsets
• Ensure that national worker protection conditions and national safety and accident prevention
regulations are observed during operation of the system
2.3 INTENDED USE
The DMUI-EASY2move is a Paddle Switch Handset for electrically Height-Adjustable Tables. It is installed by
Resellers into Height-Adjustable Table systems. It is used to control Height-Adjustable Table systems via the
DYNAMIC MOTION system. It is intended for indoor use only. It may only be installed in compatible Height-
Adjustable Table Systems and with LOGICDATA-approved accessories. Contact LOGICDATA for further de-
tails. Use beyond or outside the intended use will void the product’s warranty.
2.4 REASONABLY FORESEEABLE MISUSE
Usage outside of the intended use may lead to minor injury, serious injury, or even death. Reasonably fore-
seeable misuse of the Handset includes, but does not extend to:
• Using the Handset as a hook (for coats etc.), a door-/window-stop, or an armrest
• Connecting unauthorized parts to the product. If you are unsure as to whether a part can be used
with a Handset, contact LOGICDATA for further information
