background image

31

CONNECT YOUR PC

1.    Download the WeatherTool.exe file on your desktop, and then double-click to run it.

2.   Click the “?” in the top right corner of the software to access the PDF describing how to properly  

      set up the software and connect to one of the two associated weather servers. Follow the 

      instructions to set up your software.

3.   Once your software is set up and connected to a weather server, plug the small end (micro USB end) 

      of the USB cable to the associated port on the display console, and then connect the USB end to a 

      USB port on your PC.
If the console has been connected successfully, a “USB” icon will appear on your display, and the time 

and date on your console will be synchronized to that of your PC, as indicated by the 

          

icon. 

The display console can display live weather data as well as export the weather data to a Windows

®

-

based PC via our Weather Tool software.

Instant live data from your display console will be transmitted to the dashboard screen on your PC.

The software can be downloaded at www.logiaweatherstation.com

NOTES:

•  To avoid incorrect time stamps on your data records, make sure to reset the data logger anytime you 

    replace the batteries in the display console or in the wireless weather sensor.

•  When the data log is almost full, the DATA icon will flash continually to remind you to transfer the 

    data to your PC for storage. Once the data log is full, it will not log any additional data.

PC SOFTWARE

19

PC SOFTWARE

This console can display live data and export the weather data to the Windows base PC 

through the "Weather Tool" software . Please consult your local distributor for download details .

"Weather Tool" software icon

To connect PC

1 .  Download Weather Tool.exe file on your windows desktop and then double click to run it.

2 .  Plug the small end of the USB cable to USB port on the console and the big end of the 

cable into the USB port of the PC .

If the console is connected successfully, " 

 " icon 

will appear on display, and its time and date will be 

synchronized to that of PC momentarily, as indicated 

by the "   " icon .

Instant live data from the console will be transmitted to the dashboard screen on the PC .

In t he P C  software,  click o n

"?"  icon  located  at t he t op

right  hand c orner f or  details

of  operations  and s ettings o f

"Weather Tool" program .

Dashboard page

Uninstall the Weather Tool

To uninstall the Weather Tool, just delete the 

Weather Tool.exe

 file from your PC.

NOTE: 

 .

 -Please use the USB cable provided to connect the console to PC . 

 -Please keep the USB cable connected, during the data exporting to your PC .

 -The Microsoft Windows and worksheet software are 3rd party softwares, the interface and 

operation flow maybe different in various software version.

 -The USB cable will supply power to the console while in connection with the PC .

 -Since the model do not include UV function, so the UV index section in the PC software will 

show 0 and the export data will also show 0 .

19

PC SOFTWARE

This console can display live data and export the weather data to the Windows base PC 

through the "Weather Tool" software . Please consult your local distributor for download details .

"Weather Tool" software icon

To connect PC

1 .  Download Weather Tool.exe file on your windows desktop and then double click to run it.

2 .  Plug the small end of the USB cable to USB port on the console and the big end of the 

cable into the USB port of the PC .

If the console is connected successfully, " 

 " icon 

will appear on display, and its time and date will be 

synchronized to that of PC momentarily, as indicated 

by the "   " icon .

Instant live data from the console will be transmitted to the dashboard screen on the PC .

In t he P C  software,  click o n

"?"  icon  located  at t he t op

right  hand c orner f or  details

of  operations  and s ettings o f

"Weather Tool" program .

Dashboard page

Uninstall the Weather Tool

To uninstall the Weather Tool, just delete the 

Weather Tool.exe

 file from your PC.

NOTE: 

 .

 -Please use the USB cable provided to connect the console to PC . 

 -Please keep the USB cable connected, during the data exporting to your PC .

 -The Microsoft Windows and worksheet software are 3rd party softwares, the interface and 

operation flow maybe different in various software version.

 -The USB cable will supply power to the console while in connection with the PC .

 -Since the model do not include UV function, so the UV index section in the PC software will 

show 0 and the export data will also show 0 .

19

PC SOFTWARE

This console can display live data and export the weather data to the Windows base PC 

through the "Weather Tool" software . Please consult your local distributor for download details .

"Weather Tool" software icon

To connect PC

1 .  Download Weather Tool.exe file on your windows desktop and then double click to run it.

2 .  Plug the small end of the USB cable to USB port on the console and the big end of the 

cable into the USB port of the PC .

If the console is connected successfully, " 

 " icon 

will appear on display, and its time and date will be 

synchronized to that of PC momentarily, as indicated 

by the "   " icon .

Instant live data from the console will be transmitted to the dashboard screen on the PC .

In t he P C  software,  click o n

"?"  icon  located  at t he t op

right  hand c orner f or  details

of  operations  and s ettings o f

"Weather Tool" program .

Dashboard page

Uninstall the Weather Tool

To uninstall the Weather Tool, just delete the 

Weather Tool.exe

 file from your PC.

NOTE: 

 .

 -Please use the USB cable provided to connect the console to PC . 

 -Please keep the USB cable connected, during the data exporting to your PC .

 -The Microsoft Windows and worksheet software are 3rd party softwares, the interface and 

operation flow maybe different in various software version.

 -The USB cable will supply power to the console while in connection with the PC .

 -Since the model do not include UV function, so the UV index section in the PC software will 

show 0 and the export data will also show 0 .

6

MAIN CONSOLE

Your main console can pairing up with the wireless 5-in-1 outdoor weather sensor and up to 7 

optional wireless hygro-thermo outdoor sensors . (Not included)

Powering up the main console

1 .  Remove the battery door on the back side of the main unit .

2 .  Insert 6 new AA batteries and replace the battery door .

3 .  Once the batteries are inserted, the segments of the LCD will be shown .

NOTE:

If no display appears on the LCD after inserting the batteries, press 

[ RESET ]

 key by using a 

pointed object .

Pairing of wireless 5-in-1 weather sensor with main console

After insertion of batteries, the main console will automatically search and connect the 

wireless 5-in-1 sensor (antenna blinking) . Once the connection is successful, antenna mark 

and readings for outdoor temperature & humidity,  wind speed, wind direction and rainfall will 

appear on the display .

Changing batteries and manual pairing of sensor

Whenever you changed the batteries of the wireless 5-in-1 sensor, pairing must be done 

manually .

1 .  Change all the batteries to new ones in the sensor .
2 .  Press 

[ CH ] 

until the 

 icon appear in the Outdoor section

3 .  Press 

[ SENSOR / SYNC ]

 key .

4 .  Press 

[ RESET ]

 key on the sensor .

NOTE:

Pressing 

[ RESET ]

 key at bottom of wireless 5-in-1 sensor will generate a new ID code for 

pairing purpose . So you also need to press the 

[ SENSOR / SYNC ]

 key on the console to 

repairing up the sensor .

Pairing the wireless sensor(s) with the console

The console will automatically search and pair up your wireless sensor(s) . You can also press 

[SENSOR / SYNC ]

 key to search the on display channel's sensor manually . Once your sensor 

paired up, the sensor signal strength indicator and weather information will appear on your 

console display .

SYNC UP PC TIME

This unit is designed to automatically synchronize its calendar and clock when connected to 

the computer with PC software "Weather Tool" through USB data cable . Once connected to the 

computer, the unit will automatically synchronize the time instantly and 12:00am per day . You 

can also press the 

[ TIME SYNC ]

 key to sync up PC time instantly . 

NOTE:

 -The time sync function only work with the PC software "Weather Tool", please make sure the 

PC software is open .

 -PC Time sync up is according to your current PC time, so please ensure your PC time is 

correct . Once the PC time sync up the   icon will appear in the Time section .

 -You can also enable or disable auto time sync function by press and hold 

[ TIME SYNC ]

 key 

for 8 seconds .

Summary of Contents for LOWSB510PB







































Reviews: