29
3. Press the GRAPH/ or HISTORY/ buttons to adjust the value, or press and hold the buttons to
adjust the value more quickly.
4. Press the ALERT button when the desired value is reached to save the alert setting, then press the
ALARM button to toggle the weather alert on or off.
5. Press any button on the front of the display console to save and return to normal mode, or wait 30
seconds without pressing any buttons and the alert will save itself and return to normal mode.
POINTING THE WIRELESS WEATHER SENSOR TO SOUTH
To Silence the Weather Alert Alarm
ALERT ON
ALERT OFF
Press the SNOOZE/LIGHT button on top of the display console to silence the alarm, or it will
automatically turn off after two (2) minutes.
The outdoor wireless weather sensor is calibrated to be pointed North for maximum accuracy.
However, for your convenience, if you are a user located in the Southern Hemisphere, you can use the
sensor with the wind vane pointing South.
1. Mount and install the wireless weather sensor with the wind meter end pointed South, instead of
North. (Please refer to the Installation Instructions on page 12 for mounting instructions.)
2. While the display console is in normal operating mode, press and hold the INDEX button for eight
(8) seconds until the N icon appears in the weekday section of the display to indicate the console is
in sensor orientation mode.
3. Use the GRAPH/ or HISTORY/ buttons to change the orientation to Southern Hemisphere.
The N should change to an S.
4. Press the INDEX button another time to confirm and exit the menu.
NOTES:
• Changing the hemisphere setting will automatically switch the direction of the moon phases on the
display.
• Pointing the wireless weather sensor toward the South will allow maximum sunlight on the solar
panel, especially during the winter season in the Southern Hemisphere.
NOTES:
• Once the alert is triggered, the alarm will sound for two (2) minutes and the associated alert icon
and weather readings will flash.
• If the alert alarm automatically shuts off after two (2) minutes instead of being manually shut off,
the associated alert icon and readings will continue flashing until the reading is out of the alert range.
• The weather alert alarm will go off once the readings fall into alert range again.
17
Pressure Drop
1hPa ~ 10hPa
Barometer & Rainfall
3hPa
Hourly Rainfall
1mm ~ 1000mm
100mm
Wind Chill Low Alert
-40°C ~ 60°C
Weather index
0°C
Dew point High Alert
-40°C ~ 60°C
10°C
Dew point Low Alert
-10°C
Heat index High Alert
27°C ~ 49°C
35°C
Beaufort scale High Alert
1 ~12
6
2 . Under the current alert reading, press and hold
[ ALERT ]
key for 2 seconds to enter alert
setting and the alert reading will flash.
3 . Press
[ GRAPH / ]
or
[ HISTORY / V ]
key to adjust the value or press and hold the key to
change rapidly .
4 . Press
[ ALERT ]
key to save the alert reading then press
[ ALARM ]
key to toggle the
regarding alert on / off .
Alert
ON
Alert on
Alert off
5 . Press any
key on the front side to save and back to normal mode, or it will automatically
back to normal mode after 30 seconds without pressing any key .
To silence the alert alarm:
Press
[ SNOOZE / LIGHT ]
key to silence the alert alarm or let the alarm automatically turn off
after 2 minutes .
NOTE:
-Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and
readings will flash.
-If the alert alarm is automatically off after 2 minutes, the alert icon and readings will still keep
flash until the weather reading is out of the alert range.
-The weather alert will sound again when the weather readings falls into the alert range again .
POINTING THE WIRELESS 5-IN-1 SENSOR TO SOUTH
The outdoor 5-in-1 sensor is calibrated to point to North for the maximum accuracy . However,
for the user's convenience (e .g . users in the Southern hemisphere), it is possible to use the
sensor with the wind vane pointing to South .
1 . Install the 5-in-1 wireless sensor with its wind meter end pointing to South . (Please refer to
INSTALLATION OF THE WIRELESS SENSOR
for mounting details)
2 . In normal mode of the console, press and hold
[ INDEX ]
key for 8 seconds until the “N”
icon appears on the weekday location to enter into the sensor orientation mode
3 . Use
[ GRAPH / ]
or
[ HISTORY / V ]
key to change to lower part (Southern Hemisphere) .
4 . Press
[ INDEX ]
key to confirm and exit.
NOTE:
-Changing the hemisphere setting will automatically switch the direction of the moon phase on
the display .
-Pointing to South allows maximum sunlight on the solar panel, especially during winter
season in Southern Hemisphere
17
Pressure Drop
1hPa ~ 10hPa
Barometer & Rainfall
3hPa
Hourly Rainfall
1mm ~ 1000mm
100mm
Wind Chill Low Alert
-40°C ~ 60°C
Weather index
0°C
Dew point High Alert
-40°C ~ 60°C
10°C
Dew point Low Alert
-10°C
Heat index High Alert
27°C ~ 49°C
35°C
Beaufort scale High Alert
1 ~12
6
2 . Under the current alert reading, press and hold
[ ALERT ]
key for 2 seconds to enter alert
setting and the alert reading will flash.
3 . Press
[ GRAPH / ]
or
[ HISTORY / V ]
key to adjust the value or press and hold the key to
change rapidly .
4 . Press
[ ALERT ]
key to save the alert reading then press
[ ALARM ]
key to toggle the
regarding alert on / off .
Alert
ON
Alert on
Alert off
5 . Press any
key on the front side to save and back to normal mode, or it will automatically
back to normal mode after 30 seconds without pressing any key .
To silence the alert alarm:
Press
[ SNOOZE / LIGHT ]
key to silence the alert alarm or let the alarm automatically turn off
after 2 minutes .
NOTE:
-Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and
readings will flash.
-If the alert alarm is automatically off after 2 minutes, the alert icon and readings will still keep
flash until the weather reading is out of the alert range.
-The weather alert will sound again when the weather readings falls into the alert range again .
POINTING THE WIRELESS 5-IN-1 SENSOR TO SOUTH
The outdoor 5-in-1 sensor is calibrated to point to North for the maximum accuracy . However,
for the user's convenience (e .g . users in the Southern hemisphere), it is possible to use the
sensor with the wind vane pointing to South .
1 . Install the 5-in-1 wireless sensor with its wind meter end pointing to South . (Please refer to
INSTALLATION OF THE WIRELESS SENSOR
for mounting details)
2 . In normal mode of the console, press and hold
[ INDEX ]
key for 8 seconds until the “N”
icon appears on the weekday location to enter into the sensor orientation mode
3 . Use
[ GRAPH / ]
or
[ HISTORY / V ]
key to change to lower part (Southern Hemisphere) .
4 . Press
[ INDEX ]
key to confirm and exit.
NOTE:
-Changing the hemisphere setting will automatically switch the direction of the moon phase on
the display .
-Pointing to South allows maximum sunlight on the solar panel, especially during winter
season in Southern Hemisphere
