5
Part II. Setting up a Recording Deployment
Recording State
From this section you select how the recorder will start: either when disconnected from
the USB or via the remote control. There is no salt water or depth detection for the
DSG-ST Ocean.
Recording Schedule
Record Continuously
: Will record continuously when box checked. If not checked, the
record interval settings will be used.
Audio Options
Sampling Mode
: Only Wave mode is enabled.
Sample Rate (kHz):
Select one of the sample rates. You can record sound frequencies
up to half of the sample rate.
X3:
Check to enable lossless data compression. This is a good idea for deployments
that will use a lot of memory.
Gain:
