3
5) The drivers will take a few minutes to install. Once complete the recorder will
appear in the left hand window under “Device List.”
NOTE: Occasionally it will require several moments for the computer to
recognize the board. It also may take a more than one insertion of the
USB plug before it recognizes the board. If this continues to be an
issue follow the steps included at the end for reset- ting the USB hub in
Windows 7.
6) Select the device by clicking on its label under “Device List”.
7) Click the "
Services
" tab on the top center of the status screen.
8)
Click “
Update Application Firmware
.” Once complete, you can click “
Get Firmware
version
" to check version.