13
Step 1
Step 2
SIDE BURNER REPLACEMENT
1. Open the side burner lid and remove the side burner grate.
2. Remove the burner fixing nut at the bottom of side burner assembly as shown.
3. Remove the burner as shown.
Trouble shooting
Problem:
Possible Causes:
Sulution:
Burner will not
light
1. LP cylinder fuel is used up.
2. Bad electrode spark.
3. Burner may not be properly
seated.
4. Burner may be obstructed.
5. Cylinder valve may be closed.
6. Regulator is not properly seated
on cylinder valve.
1. Change a new full LP cylinder.
2. Check to see if the spark will light
using a match. Electrode or
collector may need adjustment.
3. Refer to the section of “To
Reinstall The Main Burners” to
reinstall the burner properly.
4. Refer to the section of “Burner
Cleaning” at to clean the burner.
5. Check then open the cylinder
valve.
6. Refer to the section of
Step 1
Step 2
