Logenex
SCDM-SD Series Manual 1.0
3
SAFETY PRECAUTIONS
The presence of this symbol is to alert the installer and user to the
presence of uninsulated dangerous voltages within the product
’s
enclosure that may be of sufficient magnitude to produce a risk of
electric shock.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS DEVICE TO RAIN OR MOISTURE. DO NOT OPEN THE
UNIT. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
DO NOT apply power to the unit until all connections have been made, all
components have been installed and all wiring has been properly terminated.
DO NOT terminate, change or uninstall any wiring without first disconnecting the
unit’s power adapter from the device.
This device is supplied with the appropriately rated 12VDC power supply with the
center pin positive. The use of any other power supply could cause damage and
invalidate the manufacturer’s warranty.
DO NOT connect the power supply to the device if the power cord is damaged.
DO NOT cut the power cord.
DO NOT plug the power supply into an AC outlet until all cables and connections to
the device have been properly connected.
The device should be installed in an environment consistent with its operating
temperature specifications. Placement next to heating devices and ducts is to be
avoided as doing so may cause damage. The device should not be placed in areas
of high humidity.
DO NOT cover any of the device’s ventilation openings.
DO NOT cover or obstru
ct the device’s fan or fan openings.
If the device has been in a cold environment allow it to warm to room temperature for
at least 2 hours before connecting to an AC outlet.
PACKAGE CONTENTS
This package contains:
One SCDM-SD1, SCDM-SD2 or SCDM-SD4 modulator
One 12VDC 3A power supply
One pair of mounting brackets
Four adhesive pads
Assorted mounting hardware
One installation and configuration manual
Inspect the package before starting installation to ensure there is no damage and all
supplied contents are present. Contact your distributor or dealer should the device be
damaged or package contents are incomplete.