LOGAN FRIABILITY TESTING SYSTEM
FAB-2S FRIABILITY TESTER
Page
11
of
12
6.0
Maintenance
Keep FAB-2S Friability Tester in a dry and flat surface
6.1
Drum
After test please clean by using a dry cloth. Do not use any solvent. Lay on clean flat surface.
Do not store at vertical position.
6.2
Drive Unit
Keep on a flat and clean surface. Clean the surface by using a dry cloth. Do not use any solvent.
6.3
Drive Shaft
Make sure both shafts are dry at all times. Clean shaft with dry cloth. Do not use any solvent.
Fuse Replacement Instruction:
To replace the fuse, turn off the power switch. Gently press the fuse holder knob in and turn counter
clockwise. Take the old fuse out and replace it with a fuse (Part#3AG-5AMP at 250VAC)
Ground Symbol
Do not remove any screws with ground symbol next to it.
