manualshive.com logo in svg

LOFTNESS Kwik Trim 53, Owner'S Manual And Parts Book

Share
Download
LOFTNESS Kwik Trim 53 Owner'S Manual And Parts Book Download Page 22

10

Kwik Trim 53

 

WARNING

Avoid serious injury, equipment
and property damage.
Improper use may result in
equipment failure and/or
falling objects.
Do NOT use boom as lifting
device.

7

5

6

Part No. N28462

Part No. N24863

Part No. N22763

WARNING

Read and understand

operator’s manual before

using this machine.

Failure to follow operating

instructions could result

in death or serious injury.

WARNING

Crush hazard.

Must wear seatbelt.
No riders allowed.
Keep machine leveled
laterally while operating.

Safety Instructions

Safety Decal Locations (Cont’d)

DANGER

ELECTROCUTION

HAZARD!

Always maintain a safe
separation from utility lines.
Consult utility company
before trimming.
Keep boom clean and
free of debris.

DANGER

Handling people with
this equipment can
cause severe injury
or death.

Do not use for lifting,
lowering or
transporting people.

5

6

7

3

4

3

4

Part No. N28461

Part No. N28464

Summary of Contents for Kwik Trim 53































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands