LOFTNESS GrainLogix GBU 12, Owner'S Manual And Parts Book

Page: 35 / 108

29 Grain Bag Unloader OM
Switching to Transport Position
(Cont’d)
1
Use the handle (1) on the ratchet jack(s) to raise the
working wheels off the ground (both sides) .
1
Remove PTO driveline safety chain .
Retract the PTO driveline sleeve (1), then pull the unloader
PTO driveline off the tractor PTO drive shaft .
CAUTION:
Never use a steel hammer when
connecting or disconnecting a PTO shaft.
Place the PTO driveline in the stored position .
NOTE: Disconnecting the PTO driveline is not required
when transporting the grain bag unloader with a
tractor.
1
2
Remove the retaining clip and pin (1) and rotate the PTO
holder bar (2) out . Rotate the unloader PTO driveline up
into the stored position .
Rotate the PTO holder bar (2) in and install the retaining
clip and pin (1) securing the unloader PTO driveline in the
stored position .
NOTE: The electrical connector must stay attached for
transporting on the highway with a tractor. See
“Transporting on a Roadway” on page 30.
NOTE: Secure all hydraulic hoses and the electrical
harness before transporting.
Operating Instructions