![LOFTNESS GrainLogix GBU 12 Owner'S Manual And Parts Book Download Page 33](http://html1.mh-extra.com/html/loftness/grainlogix-gbu-12/grainlogix-gbu-12_owners-manual-and-parts-book_1934318033.webp)
27
Grain Bag Unloader OM
Resealing The Grain Bag
Fold each side of the grain bag towards the center . Start
the fold approximately 2 ft . ( .609 m) up the side of the
bag, then fold to the center (on both sides) .
Place one plank (1) underneath the grain bag
approximately 12 in . (304 .8 mm) back from the end of
the bag . Place a second plank (2) on top of the grain bag
(3) and first plank .
Align the top and bottom planks and fasten the two
planks together .
Roll the grain bag around the planks a minimum of two
times . Position the planks approximately 3 ft . ( .914 m)
back underneath the grain bag .
NOTE:
Place adequate weight on the bag end and
planks to hold in place.
Switching to Transport Position
1
Remove the retaining clip (1) and pin . Using the handle,
pivot bag cutting knife into the storage position .
CAUTION:
The Bag Cutting Knife is SHARP!
Use extreme care when placing the bag
cutting knife in the work or transport
position. Use of gloves is recommended.
1
Install the pin (1) and retaining clip securing the bag
cutting knife in the storage position .
Engage the PTO on the tractor .
Operating Instructions
Summary of Contents for GrainLogix GBU 12
