LOFTNESS 60BA4 Owner'S Manual And Parts Book Download Page 3

LOFTNESS SPECIALIZED EQUIPMENT, INC. 

LIMITED WARRANTY POLICY

 

 

The limited warranty policy begins upon delivery of the unit to the original customers. 
All Loftness products have a one (1) year limited warranty.  The XLB10 Grain Bag Loader has a two (2) year limited warranty. 
If any Loftness product is used as rental or leased equipment the limited warranty period is for only 30 days from the delivery date to 

the original customers. 
Loftness Specialized Equipment, hereinafter referred to as LOFTNESS, a manufacturer of quality machinery since 1956, warrants 

new LOFTNESS machinery and/or attachments at the time of delivery to the original purchaser, to be free from defects in material 

and workmanship when properly set up and operated in accordance with the recommendations set forth in the LOFTNESS Operator’s 

Manual. 
LOFTNESS’ liability for any defect with respect to accepted goods shall be limited to repairing the goods at an authorized dealer or 

other LOFTNESS designated location, or replacing them as LOFTNESS shall elect.  The above shall be in accordance with 

LOFTNESS warranty adjustment policies. 

WARRANTY REQUIREMENTS 
Warranty registration form must be filled out and returned to Loftness Specialized Equipment to validate all warranty claims.  

To receive a warranty claim, a return authorization from LOFTNESS must be obtained.  The failed part may then be returned in an 

untampered status.  This warranty does not include freight or delivery charges incurred when returning machinery for servicing.  

Dealer mileage, service calls and pick-up/delivery charges are the customer’s responsibility.

 

LIMITATIONS OF WARRANTY 

LOFTNESS products are designed to provide years of dependable service when proper use and maintenance is adhered to.  The 

potential for misuse in many applications exists; therefore, a limited warranty is provided as follows. 
This warranty shall not apply to any machine or attachment which shall have been repaired or altered outside the LOFTNESS factory 

or authorized LOFTNESS dealership or in any way so as in LOFTNESS’ judgment, to affect its stability or reliability, nor which has 

been subject to misuse, negligence or accident, nor to any machine or attachment which shall not have been operated in accordance 

with LOFTNESS’ printed instructions or beyond the company recommended machine rated capacity.  LOFTNESS may elect to have 

an area representative evaluate the condition of the machine before warranty is considered. 
In addition, this limited warranty provides no coverage for general wear or maintenance items, misuse, environmental conditions 

and/or contamination for which they were not designed or not intended, including but not limited to the following items: 

 

Use of machine beyond its rated capacity; 

 

Improper knife replacement; 

 

Missing knives; 

 

Striking foreign objects 

 

Lack of lubrication 

 

Failures caused by running in an “out-of-balance” condition; 

 

Tires; 

 

Conveyors; 

 

Auger wear; 

 

Saw blades;   

 

Brakes and brake pads; and 

 

Hydraulic hoses damaged by being caught in “pinch points” or by moving parts. 

 

EXCLUSIONS OF WARRANTY

 

Except as otherwise expressly stated herein, LOFTNESS makes no representation or warranty of any kind, expressed or implied. 

 The 

implied warranty of merchantability and fitness for a particular purpose are excluded from this  limited warranty.

  The 

remedies set forth in this warranty are the only remedies available to any person under this warranty.  LOFTNESS shall have no 

liability to any person for incidental, consequential or special damages of any description, whether arising out of express or implied 

warranty or any other contract, negligence, or other tort or otherwise.  This exclusion of consequential, incidental and special damages 

is independent from and shall survive any finding that the exclusive remedy failed of its essential purpose.  Upon purchase, the buyer 

assumes all liability, all personal injury and property damage resulting from the handling, possession or use of the goods by the buyer. 
No agent, employee or representative of LOFTNESS has any authority to bind LOFTNESS to any affirmation, representation or 

warranty concerning its machinery and/or attachments except as specifically set forth herein.                                         (October 2020)

 

Summary of Contents for 60BA4





























































Reviews: