LOFTNESS 180DW, Owner'S Manual And Parts Book

Page: 33 / 104

21 30' Draper Windrower Shredder OM
Preliminary Draft 08.05.13
Transport to Operation Configuration
Procedure (Cont'd)
Make sure locking pin (7) in all wheel assemblies are in
the
uP position. Note location of retaining clip (8).
NOTE: Only the rear left and rear right wheels (those
designated in a transport configuration) should
have had pins fully inserted during transport.
NOTE: There is no locking pin for the left front wheel
assembly (that which is designated during an
operation configuration).
If locking pins are difficult to pull up, use another locking
pin to pry pin out as shown.
Remount and start tractor. Pull draper windrower forward
to make the rear wheels turn enough so the holes in the
rear wheel pivots are no longer aligned. Stop.
Dismount tractor and pull retaining clip (9) in the locking
pins on the
rear wheel assemblies only .
DO NOT
pull retaining clip on front wheel assembly.
Operating Instructions
7
8
9