LOFTNESS 180DW, Owner'S Manual And Parts Book

Page: 32 / 104

20 30' Draper Windrower Shredder OM
Preliminary Draft 08.05.13
Transport to Operation Configuration
Procedure (Cont'd)
Turn the tractor off and connect the hydraulic hoses to the
tractor's hydraulic system.
DANGEr: Failure to turn the tractor off before
connecting the hydraulic lines could result in
serious injury.
NOTE: Hydraulic hoses are labeled to indicate which
coupler to connect to on the tractor's hydraulic
system.
NOTE: Make sure there is enough slack in the hydraulic
hoses to allow for sharp turns.
Remove tractor end of PTO shaft from the storage cradle
(3) by pulling pin (4) and retaining clip. Return pin and clip
to the cradle.
Connect the driveshaft. See “PTO Set-up” on page 15 for
reference when installing the driveshaft.
Once connected, add some slack to the operation hitch
cable to allow for sharp turns.
CAuTION: A taut cable could result in
damage to the winch and winch bracket when
turning.
Using the winch, bring the transport hitch (5) to its
upright position, making sure winch is set in the ratchet
position.
DANGEr: Failure to raise the hitch with winch
in the ratchet position could cause the tongue
of the hitch to fall forward suddenly, which
could result in serious injury to those nearby.
Connect hitch to link (6), aligning hole in link to
corresponding hole on hitch. Insert pin and add linchpin
clip to secure.
Wrap safety chain around hitch and secure hook end to
chain to keep from unraveling during travel.
Operating Instructions
3
4
5
6