background image

 

5

MAINTENANCE PROGRAM

 

 

Below are indicated the operations and the period we consider essential to got the best efficiency and performance of your anchor windlass. 

A.

 

Clean all the outer surfaces and the hidden points with fresh water and remove the salt layer. 

B.

 

Grease the outer rotation parts . Particularly the main shaft thread and the clutch cones. Check for evidences of corrosion and stress. 

C.

 

Check the terminals of the electric motor. Test the drop of voltage at the terminals. 

D.

 

Replace of the all outer seals. The geabox is proper filled with SAE 90 long life oil. 

E.

 

Remove the windlass from the deck to clean the salt under the base plate. 

 

 

 

 

Yearly frequency of use of the boat 

 

 

 

 

Less than 2 months 

 

 

From 2 to 6 months 

 

 

Over 6 months 

 

Charter 

Every 3 Months 

  

A,B 

A,B 

Every 6 Months 

 A,B    

Every 12 Months 

A,B,C C  C  C,D 

After 24 Months 

 D D E 

After 36 Months 

D,E E  E   

 

 

LOFRANS LIMITED INTERNATIONAL WARRANTY

 

 

Lofrans warrants this product for a period of 2 years subjected to the conditions listed below : 

 

1.

 

The product must be registered. The registration must be done within 30 days from the date of purchase by one of these options : online  going to the web site 

www.lofrans.com

 under the page “Product Registration”and following the instructions or by faxing to +039 2004299 the completed registration card attached to the 

instruction manual. 

2.

 

This warranty starts from the date of purchase of the product from the original purchaser. If the product is first equipment of a new boat the warranty starts from the date of 

purchase of the boat.  

3.

 

This warranty covers original defects in material and workmanship. 

4.

 

This warranty is limited to the repairment and/or the replacement of the original defective part. 

5.

 

The claim of warranty must be promptly notified in writing and sent by fax or e-mail to Lofrans or Lofrans authorised distributor providing the serial number of the product and 

the registration warranty number. Lofrans reserves the right  to require the proof of purchase of the product to accept the claim of warranty.  

6.

 

The defective part/product must be returned to Lofrans or Lofrans authorized distributor. List of authorised distributors is available on the web site 

www.lofrans.com

7.

 

This warranty does not cover failures due to  : use of the product in applications for which they are not intended , corrosion , normal wear and tear , discoloration , 

unauthorised alteration of the product , improper installation , incorrect use or maintenance of the product , conditions that exceed the product’s performance specifications  

8.

 

This warranty does not cover any loss or damages to the original purchaser due to a proven non conformity of the product with the exception of the cases ruled by the Italian 

law. 

9.

 

Lofrans reserves the right to disclaim the warranty in case the product be controlled by improper electric devices and/or in case of non installation of a proper circuit breaker 

on the electric power line. 

 

The consumer statutory rights are not affected by this warranty according to the national legislation, disciplining the sale of goods. 

This warranty is ruled by the Italian law 

For every controversy the Court of Milan is competent exclusively.

 

 

 

 

Summary of Contents for PROJECT 2000 USA











Reviews: