Lofra Dolcevita, Instruction Manual

Page: 28 / 40

28
Put the oven inside the furniture and open the door.
Insert four self-threading burnished screws for wood with washer salvo-enamel edge in
four holes of diameter 9mm from the front.
Close the oven door.
1.2 ELECTRICAL CONNECTION
Connection to the electrical system must be done using the oven’s cable. Do not position
the cable on parts of the oven which get to a temperature above 50C room temperature
(top and sides); it’s recommended to use a plug which complies with the CEE regulations
in force. If the appliance is directly connected to the mains electricity supply or if the plug
is not accessible after installation, an omni polar cut-out device (with a contacts gap of at
least 3mm) must be fitted in an accessible area to the user.
Use the yellow-green cable for earthing. If the cable is not long enough, replace it with a
cable at least as thick as required in the chart.
The company does not accept any liability for accidents derived from faulty or inexistent
earthing.