6. Autostart Operation
6.4
Behavior
The following links to videos show how to set up the panel for sample applications:
to view Dual Float Empty.
to view Transducer with Backup Switches.
6.4.1
Configuring Operation
Configuring Autostart begins with selecting the desired behavior. The two choices are:
1.
High to low, examples:
•
High water level to low water level
•
High pressure to low pressure
•
High temperature to low temperature
2.
Low to high, examples:
•
Low water level to high water level
•
Low pressure to high pressure
•
Low temperature to high temperature
6.4.2
Configuring Start and Stop Events
The next step is to define the start and stop events. The choices are:
•
Single switch
•
Cycle Run
–
Start upon entering Autostart modes
–
Stops after x minutes
–
Restarts after y minutes
•
Pressure Washer
–
Manually started and stopped
–
Switched input toggles between idle and Intermediate RPM
•
Remote Control
–
Start and stop via switch
–
Throttle up and down via two other switches
–
Single start/stop
•
Dual switch
–
Start and stop via dual (high and low) switches
•
Transducer
Page 24
LOFA document No. 463-3002-59
Page 24
