Loewe klang 9
User handbook
11
english
Connecting Loewe klang 9 via LINE IN
Via the
LINE IN
analogue interface, you can connect the klang 9 to your TV set or any audio source.
Disconnect all devices from the mains before connecting.
Connect the analogue audio output
AUDIO OUT
(1
of the TV set or of another audio source with the
LINE IN
audio inputs
LEFT/RIGHT
of the speaker. To do so, use
the supplied 3.5 mm jack/2 x cinch audio cable. If an audio source is used, which has separate jacks for left/right; use appropriate standard cinch cables.
Connect the cables to the speaker according to the corresponding installation instructions.
Use the mains cable supplied to connect the
220-240 VAC 50/60 Hz
socket of the klang 9 to a 220-240V 50/60 Hz socket.
If the menu item
TV speaker
is active in the sound components wizard of the Loewe TV set, it may happen that after turning on the TV set, the klang 9 connected
to AUDIO OUT is operated at a high volume. Therefore, select in the sound components wizard first the
Speaker system (AUDIO OUT)
(1
before connecting the
speaker to the mains.
Mains socket
Mains socket
Mains cable
Audio cable 3.5mm jack / 2x cinch
Mains cable
Loewe klang 9 (left)
Loewe klang 9 (right)
another audio source/
TV-set (AUDIO OUT)
(1
For Loewe TV sets as of chassis SL3xx and software V2.2.13 without AUDIO OUT connector, use the HEADPHONE connector.
Connecting Loewe klang 9 via LINE IN
Summary of Contents for klang 9
Page 1: ...Loewe klang 9 Audiodesign User handbook Loewe klang 9 Us U er e handbook...
Page 2: ...ttv...
Page 19: ......
