Loewe Individual 40 Selection, User Manual

Page: 24 / 152

Connect 32 DR+ - Connect 55
User manual
24
„
Initial installation
Setting options for the satellite system (single satellite):
Select satellite,
OK Confirm selection.
Proceed to next step.
Select Dual band (low/high) or Single band .
Here you specify if you use a Dual Band (Universal)
LNB or a Single LNB.
Proceed to next step.
Set LNB frequencies.
OK Adopt settings.
The setting of the LNB frequency is only called
when you have used the setting
Single band
in step Dual / single band .
Normally, you do not need to change the values
for high and low band, unless the LNC (LNB) of
your satellite system uses a different oscillator
frequency (important for the frequency display).
Proceed to next step.
Proceed to section Setting options for DVB-S
reception (continued) .
Optus D1160°E
Türksat 42°E
Hellas Sat2 39°E
Eutelsat 36A 36°E
Eutelsat 28A 28,5°E
ASTRA2 28,2°E
ASTRA3 23,5°E
Eutelsat 5 West A 5°W
Nilesat 7°W
Eutelsat 7 West A 7,2°W
Eutelsat 8 West A 8°W
Eutelsat 12 West A 12,5°W
Telestart12 12,5°W
Intelsat901 18°W ASTRA1 19,2°E
Eutelsat 16A 16°E
Hot Bird 13°E
Eurobird 9A 9°E
Eurobird 7A 7°E
ASTRA4A 4,8°E
Thor/Intelsat10-02 0,8
Select satellites
Please specify here which satellite you receive.
Note: The newly selected parameter must be confirmed with the button.
Back with Proceed with
OK
Select
single satellite
Here, please specify whether you are using a Dual Band (Universal) LNB or a Single Band
LNB.
Dual/single band (ASTRA1 19,2°E)
Dual band (low/high) Single band
Back with Proceed with
Dual/single
band
Please specify the oscillator frequency for your LNB.
Note: The newly selected parameter must be confirmed with the button.
LNB frequencies
ASTRA1 19,2°E low Band 9750 MHz 10000 MHz 10200 MHz 10600 MHz
Back with Proceed with
OK
LNC
frequencies
Setting options for the satellite system (2 satellites on 22
kHz switchbox / 2 satellites on toneburst switch):
Mark Satellite 1 / Satellite 2 ,
select satellite.
OK Adopt settings.
Proceed to next step.
Set LNB frequencies.
OK Adopt settings.
Normally, you do not need to change the values
unless the LNC (LNB) of your satellite system
uses a different oscillator frequency (important
for the frequency display).
Proceed to next step.
Proceed to section Setting options for DVB-S
reception (continued) .
Thor/Intelsat10-02 0,8
Eutelsat 5 West A 5°W
Nilesat 7°W
Eutelsat 7 West A 7,2°W
Eutelsat 8 West A 8°W
Eutelsat 12 West A 12,5°W
Telestart12 12,5°W ASTRA3 23,5°E
ASTRA1 19,2°E
Eutelsat 16A 16°E
Hot Bird 13°E
Eurobird 9A 9°E
Eurobird 7A 7°E
ASTRA4A 4,8°E
Select satellites
Please select satellite 1 and satellite 2.
Note: The newly selected parameter must be confirmed with the button.
Back with Proceed with
OK
none
Optus D1160°E
Türksat 42°E
Hellas Sat2 39°E
Eutelsat 36A 36°E
Eutelsat 28A 28,5°E
ASTRA2 28,2°E
Satellit 1 Satellit 2
Satellite
selection
Please select the LNB frequency for the Low Band.
Note: The newly selected parameter in each case must be confirmed with the button.
ASTRA1 19,2°E Low Band 9750 MHz 10000 MHz 10200 MHz 10600 MHz
Hot Bird 13°E Low Band 9750 MHz 10000 MHz 10200 MHz 10600 MHz
LNB frequencies
OK
Back with Proceed with
LNB frequencies
Please specify the oscillator frequency/frequencies of your LNB.
Note: The newly selected parameter in each case must be confirmed with the button.
ASTRA1 19,2°E low band 9750 MHz 10000 MHz 10200 MHz 10600 MHz
ASTRA1 19,2°E high band 10600 MHz 10750 MHz 11000 MHz 11250 MHz
Hot Bird 13°E low band 9750 MHz 10000 MHz 10200 MHz 10600 MHz
Hot Bird 13°E high band 10600 MHz 10750 MHz 11000 MHz 11250 MHz
OK
Back with Proceed with
LNC
frequency
(22 kHz
Switch box)
LNC
frequencies
(Toneburst
switch)