67 -
english
Media+
Configuration of the built-in LAN adapter
➠
Adapter configuration is accessed over the media menu
(see page 66).
You will see an overview of the current settings for the
selected network adapter (for an explanation of the points,
see page 68).
OK
Change settings
for the network adapter.
Select type of
IP configuration
.
Manual:
Enter your fixed static IP address manually
(see below).
Automatic:
Automatic configuration of the IP address
via DHCP server or via multiple protocols
according to UPnP specification (including
DHCP).
OK
Proceed
.
If
manual
has been selected under
IP configuration
:
Enter IP, Subnet mask, Gateway and DNS server
addresses in succession with the numeric keys on
the remote control.
OK
Proceed
.
You will now see an updated overview of the settings for
the network adapter.
OK
End of wizard
.
Configuration of a wireless adapter (e.g. WLAN bridge adapter)
(1
➠
Adapter configuration is accessed over the media menu
(see page 66).
You will see an overview of the current settings of the
network adapter (similar to the illustration in the left-hand
column).
OK
Change settings
for the network adapter.
The TV set now searches for wireless routers.
Red button:
Stop search
.
After the end of the search:
Select required base station from the options found.
OK
Proceed
.
If the desired access point is not found:
Red button:
Repeat the search
. Or:
Yellow button:
Specify base station manually
, e.g. if the
SSID of the access point is not transferred.
Same procedure as for
Rename station
,
see page 47.
OK
Proceed
.
If your wireless network has an encryption, select the
encryption method and then enter the WLAN password
(procedure same as
Rename station
, see page 47).
➠
Contact your network administrator if you do not
know the WLAN code.
➠
For encryption types supported, see page 143.
For WEP encryption:
Select the
WEP index
,
OK Proceed
.
Select type of
IP configuration
(see left column).
You will now see an updated overview of the settings for
the network adapter.
OK
End of wizard
.
OK
NETWORK WIZARD: WIRED
Current adapter settings:
IP
configuration
Manual
IP
address
192.168.2.123
Subnet
mask
255.255.255.0
Gateway
192.168.2.1
DNS server 1
192.168.2.1
DNS server 2
192.168.2.1
Additional adapter data:
MAC
address
00:09:82:11:99:11
Change settings
(1
Only for TV sets with WLAN functionality, see table on page 146.
Summary of Contents for Individual 32 Compose Sound LED
Page 156: ...156 english EC Declaration of Conformity...
Page 157: ...157 english...
Page 162: ......
