Loewe Individual 32 Compose Sound LED, Operating Instructions Manual

Page: 28 / 162

- 28
english
Setting options for the satellite system
(other communal installation):
Select satellite,
OK Proceed .
Select network.
If several networks are available over DVB-S, you
can decide which network you want to receive your
channels from.
OK Proceed .
Select and adapt settings.
Normally, you do not need to change the values for high
and low band, unless the LNC (LNB) of your satellite
system uses a different oscillator frequency (important
for the frequency display).
If your set is connected to a single-cable system without
external voltage supply, you can connect the antenna
supply (13V or 18V / max. 450mA).
OK Proceed .
(with Setting options for all types of reception on
page 30).
Initial installation
Select single
satellite
Network
selection
LNB
settings
LNC
frequency
Supply voltage
OK
OK
INITIAL INSTALLATION (DVB-S)
Select single satellite
Astra1 19,2°E Hellas Sat2 39°E
Hot Bird 13°E Hispasat 30°W
Astra2 28,2°E Intelsat10 02 1°W
Astra3
23,5°E Intelsat901 18°W
Atlantic Bird1 12,5 °W Nilesat 7°W
Atlantic Bird2 8°W Pan Am Sat 43°W
Atlantic
Bird3 5°W Sirius2/3 5°E
Eurobird1 28,5°E Telekom2C 5°W
Eurobird 9A 9°E Telekom2D 8°W
Eutelsat
W2 16°E Telestar12 12,5°W
Eutelsat W3A 7°E Thor2/3 0,8°W
Eutelsat W4 36°E Türksat 42°E
Proceed
OK
INITIAL INSTALLATION (DVB-S)
LNB frequency 9750 MHz
Supply voltage off
Proceed Back
OK
Proceed Back
INITIAL INSTALLATION
Network selection
other network
CanalDigitaal
OK