8
New CI module plugged
After plugging a new CI module and switching
on the TV set, the following dialog box
appears:
Autom. channel search
Press OK to proceed
OK
E End
Your TV set has detected a new CI module.
This requires a program search for all
new receivable programs.
After pressing the
OK
button, the wizard for
the automatic station search is started. Please
check the suggested search parameters there.
Continue with the section ”Automatic station
search” on page 7.
Default for DVB subtitles
If the station provider offers DVB subtitles, you
can have these displayed permanently or
suppress the display. You can also choose
between ”Translation” or subtitles for the
persons with hearing impediments.
1. Call the ”TV-menu” with the
M
button.
2. Select the ”Settings” line and confirm with
OK
.
3. Select the line ”DVD subtitles” and confirm
with
OK
.
DVB subtitles
Subtitles off
OK
M
i
E
Back
Info
End
for translation
for impaired hearing
If you select ”Subtitles off” there is only a
display in the status bar. See page 11 for
showing subtitles again.
COMMON INT
ERF
A
C
E
COM DIGIT
AL-TV
Eject button
CI module
COMMON INTERFACE
CI module
Signal Box
Initial start-up
Inserting the Common-
Interface module
In order to receive encrypted channels, the
Common-Interface module (CI module) for
the Smartcard has to be inserted in the
appropriate slot of your TV. If this is not
already the case, you have to insert it. You
will find the slots on the back of your Loewe-
TV-set or on the front of the signal box (in
Spheros 42 HD).
1. Switch off your TV set with the On-Off
switch on the TV.
2. First push the Smartcard into the CI module
as far as possible. The side with the golden
contact chip neeeds to face the side of the
module printed with the provider’s logo.
Printed arrows show you how to insert the
card.
Please also observe the installation
instructions enclosed with the Smartcard.
3. Push the CI module carefully, contact side
first, into one of the two slots labeled
”Common Interface”. The side printed with
the provider’s logo must face left or up.
Make sure the module is not inserted skew.
Do not use force. The eject button is pressed
out when the module snaps in.
Removing the CI module
You can remove your Common-Interface
module to receive encrypted channels on
another TV set.
1. Switch off your TV at the power switch.
2. Press in the eject button on the slide-in
module, the module jumps out.
3. Pull the module out of the set.
31789_001 DVB_T_V3_GB
13.11.2003, 15:27 Uhr
8
