5
Signal Box Spheros 42 HD
TV set
Connections on rear of unit
Digital audio output
You can use the digital audio signals which
your TV receives for playing or recording the
sound by an external audio system.
The digital audio output on the DVB-T module
(see fig. page 5/6) only outputs the sound of
the digital TV or radio station if available.
In the Spheros 42 HD the digital audio signal
is output at the ”OUT DIGITAL” socket.
Settings
✳✳
You can set the digital sound format in
the ”TV-menu – Sound” – ”Digital-DVB-
Audio Output” (if available). If ”Automatic” is
set the highest value digital sound on offer is
output at the digital audio output. If you have
connected a unit which can only handle PCM
stereo sound, select ”Only PCM”.
✳✳
Function is not available when “Auro/
Certos” connected.
✳
The illustration shows the full unit
equipment; variations are possible depending
on the unit model.
SYSTEM
RC5/
RC6
IR-
LINK
SUB
SERVICE
VGA
DISPLAY
PIP UHF/VHF
AV 3
(RGB/YUV)
AV 2
(RGB)
AUDIO
IN 1
DVI
AV 1
COM DIGITAL TV
COMPONENT
IN
TVO
C
R
L
S
U
R
1
IN
2
DIGITAL
AUDIO
IN 3
R
L
R
L
R
L
AUDIO
OUT
120-240V~
50/60 Hz
OUT
AUDIO
IN 2
Y
CR/
PR
CB/
PB
SAT
UHF/VHF
Digital
sound output
Antenna socket
terrestrial (DVB-T)
Connect antenna/
cable system (analog)
VHF/UHF
AV2/RGB
AV3
AV1
RC5/RC6
R
SUR
DIG OUT
DIG IN
AUDIO IN
SERVICE
AUDIO OUT
VHF/UHF
R
IR
1
L
2
SUBWOOFER
STAND
VGA
SUB
L
C
CTRL
Antenna socket
terrestrial (DVB-T)
Connect antenna/
cable system (analog)
IN
VHF/UHF
COMMON INTERFACE
COM DIGITAL-TV
DIG OUT
DIGITAL-TV
Slots for Common Interface modules
Digital sound output 1
This connection
is intended for
future applications
✳
Digital sound
output 2
31789_001 DVB_T_V3_GB
13.11.2003, 15:27 Uhr
5
