13
Loewe Hotline
If you are still unable to resolve the problem,
please contact your dealer or the Loewe Hotline:
Telephone: +49-(0)1801 222 563 93
Fax: +49-(0)9261 99 500
Internet: www.loewe.de
E-mail: www.loewe.de (contact section)
Problem
No coded programs are shown in the station
table although the CI module and the
Smartcard of the provider are used.
Message ”Transmission break”
Message ”Please wait”
Possible cause and remedy
CI module and/or Smartcard are possibly not inserted correctly (see the section ”Connection and
initial start-up”). You can check whether the module and card are inserted correctly by having the CI
module settings displayed (see page 11).
If no information is displayed for CI module, Smartcard or CI software, the module and card are not
installed correctly. Insert the module and card correctly and repeat the program search (see page 7).
The program is not available at present.
Important data are being stored. This may take a few seconds. Please do not switch the set off during
this time.
31789_001 DVB_T_V3_GB
13.11.2003, 15:27 Uhr
13
