Operator manual
Corival
17
LODE
P-display
ver X.YZ
system parameter
TERMINAL
manual
Term
In case the Blood pressure option is available it is followed for approximately 1 second by the
text "BPM Initialized "thereby indicating correct operation of the BP device. The SpO
2
comes
together with the P-Display. When this option is available correct operation is indicated by
the text "SpO2 Initialized" In case the 0-Watt Start -up System is available the text "0 Watt
Initialized" is displayed indicating the 0-Watt Start -up System is detected
When all three options are installed the display shows:
Then the main menu appears:
The menu displayed in capitals can be selected. As extra reminder the first 4 letters of the
selectable mode are showed above the confirmation button. With the
▼▲
keys you can scroll
through the other menus and select SYSTEM PARAMETERS, MANUAL, ANALOG or
PROTOCOL. With the right
( )
confirmation button the menu in capital can be selected. The
left
( )
escape button is used to go back one level in the menu structure.
The ergometer is now ready for use. If nothing appears in the display(s), check whether the
power cord and the control unit have been properly connected or contact your supplier.
B.3.1
Menu structure programmable control unit
0. MAIN MENU
1. ANALOG
1. MANUAL
1. TERMINAL
1.
SYSTEM PARAMETER
2. SET DISPLAY
3. POWER
3. RPM
3. HEARTRATE
3. TORQUE
LODE
BPM Initialized
SpO2 Initialized
0 Watt Initialized
