background image

E2620 Auxilliary Power Unit User Guide

Support

Product support is available at [email protected] and at
613-831-2172.  We also welcome your feedback in order to 

continually improve our products.

The E2620 Auxilliary Power Unit (APU) and Monitor is easily 
customizable to meet the needs for a variety of installations.  

Contact Locus Engineering with the details of your application at 
[email protected] 

Warranty

Locus Engineering Inc. warrants this product to be free of defects 
in workmanship and materials for a one year period. It is 

understood that this unit is a prototype unit that may require 
modifications or improvements to meet customer requirements.   

This unit will be repaired or modified within the warranty period 
subject to the following conditions:

the warranty will not apply to normal wear or consumable 

items such as batteries

the warranty will not apply to reverse battery installation

the warranty will not apply if unauthorized repairs or 
modifications are made

12

This device is not authorized for use with any product where the failure or malfunction of 
this device can reasonably be expected to cause injury or death.  This device is not 
authorized for use in any life support system due to the risk of injury or death.

Summary of Contents for E2620













Reviews: