Loctite MM25, Operating Manual

Page: 32 / 40

32
4 Installation
4.7 Connecting
Caution!
The connecting and disconnecting of the connection cable to the dispenser may be
made only when
the controller is switched off . The electronics in the drive motor could
be damaged.
● Connect Dual Rotor Dispenser MM25 to the interfaces
Pump 1 (Channel A) and
Pump 2 (Channel B).
4.8 Priming of the Dispensers
☞
Note!
The following steps must be performed in order.
● Mount feedline fittings and tubes of
components A and B to the
corresponding 1/8" terminals
20 of the
dispenser.
● Mount product fittings
20
(G1/8”) and
feedline of the components A and B to
the respective
G1/8”threads
20 of the
dispenser.
● Mount mixer
1 .