9
4 Installation
•
Put the inlet pipe through the hood.
•
Mount the prepared hood to the suction
arm.
•
Mount the preassembled suction arm to the
arm connector.
5 Operation
Operation
• Place the suction hoses 10 or suction arms 11 at the workplaces.
• Connect power plug.
• Switch on the unit.
• Adjust the airflow 8.
Shutdown
For short periods:
• Decrease the airflow 8 to zero.
For longer periods:
• Switch off the unit.
• Disconnect the power cord.
Returning to Operation
After short periods of non-use:
• Check, if the suction hose10 is at the right place.
• Increase the airflow 8.
After longer periods of non-use:
• Check, if the suction hose10 is at the right place.
• Connect the power cord.
• Switch on the unit.
