8
4 Installation
4.1 Environmental and Operating Conditions
– Do not operate if there is a danger of condensing humidity or condensation.
– Do not splash with water!
4.2 Connecting
the
Unit
Before connecting the unit
• Unpack the unit and put the unit carefully on the side
• Mount the four supplied wheels to the bottom side of the unit.
• Put up the unit again.
• Connect power cord to the unit.
4.3 Connecting the Suction Hose
The Air Filter System can be equipped via two Y splitters with four suction hoses for supplying
up to four workplaces. These Y splitters have to be mounted before the suction hoses are
mounted. The Y splitters have to be ordered separately.
•
Remove
blind
cap.
• Push the suction hose 10 into the suction
flange 1 or Y splitter.
4.4 Connecting the Suction Arm
•
Unscrew suction flange (black) 1.
•
Mount the arm connector (red) to the unit,
using the original screws. The arm
connector is supplied with the suction arm
11.
