7
Dispensing
5
5.1
First Operation
5.1.1
Priming the Hand-held Applicator
☞
To avoid air bubbles during dispensing, the product line must be filled and then purged of air.
●
Place a container under the dispensing valve
since the product will flow out.
●
To fill the product line, hold the dispensing valve slanted upward so that no air will be
trapped inside the valve chamber.
●
Slide the silicone tubing provided over the dispensing needle.
97111
●
Perform the filling of the product line according to the operating
instructions of the LOCTITE
Manual Controller 97101.
97112 / 97116
●
Perform the filling of the product line according to the operating instructions of the LOCTITE
Controller 97102.
Installation
4
4.2
Mounting the Pistol Grip
8950087 Rev A Hand-Held Appl 5/1/00 3:38 PM Page 18
