Locomotor Kelly Stand 124 User Manual Download Page 4 | Manualshive

Page: 4 / 17

Locomotor Kelly Stand 124 User Manual Download Page 4

KELLY STAND

LOCO - 124 USER MANUAL

Page

4

Select Healthcare (UK) Ltd
Unit 2 Albert Road
Rushden
Northants
NN10 0BU Tel:

01933 411729 Fax: 01933 410213

Designed and Developed by: Proto Magic Innovations Ltd Page 4 ISSUE 4

KELLY STAND INSTRUCTIONS 07 23/02/2010

ELECTRICAL REQUIREMENTS

The following details are required for the battery charger that is supplied with the
KELLY STAND:-

FOR APPLIANCES SUPPLIED WITH FITTED PLUG.

If the socket outlets in your home are not suitable for the plug supplied with your battery charger,
it should be removed and the appropriate plug fitted. NOTE: The plug removed from the mains
lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged
into a live socket outlet.

FITTING A PLUG
WARNING: THE CHARGER MUST BE EARTHED
WARNING: THE CHARGER MUST NOT BE USED IN A BATHROOM

IMPORTANT

The wires in the mains lead are coloured
in accordance with the following code:

Green / Yellow

=

Earth

Blue

=

Neutral

Brown

=

Live

If you fit your own plug and the colours of the wires in the mains lead do not correspond with the
markings identifying the terminals on your plug proceed as follows:-

The wire which is coloured Green and Yellow must be connected to the terminal in the plug
marked E or with the earth symbol, or coloured Green or Green and Yellow. The wire which is
coloured Brown must be connected to the terminal in the plug which is marked with the letter L
or coloured Red. The wire coloured Blue must be connected to the terminal in the plug which is
marked with the letter N or coloured Black.

Before connecting to the mains, check that the supply voltage is the same as that shown on the
charger. A three pin plug must be used with a 3A fuse. If a BS1363 fused plug is used it should
be fitted with a BS1362 3A fuse.

If your house supply has two pin sockets or you are in any doubt, consult a competent
electrician.

«
...
2
3
4
5
6
...
»

Summary of Contents for Kelly Stand 124


















Reviews:

No comments