www.yachtrouter.com
9
When internal antennas does not give satisfied connectivity we suggest installation of external WIFI antenna that will increase
range and performance in vessel-to-shore connectivity (e.g. Hotspot in marina). We suggest the same for mobile network antenna
too. If you plan to install external antennas use only high-quality antennas and low-less coax cables to avoid signal degradation
(check our website
www.yachtrouter.com
).
Example of External WIFI and Mobile antennas with various
mounts connected via coax cables to Yacht Router.
SCAN UHF3G3B3 mobile network antenna
Deck mount
Adaptor tube
RP-SMA male to N-type female adaptor - RTN-01
12.2.
Connecting power supply
Yacht Router Micro 4G has wide range DC power supply (9-18 VDC). We strongly suggest you to install proper fuses (2.5A) on
power supply sources cable (positive - red cable). Connect power cable that is supplied with Yacht Router where
RED is positive
and
BLACK cable is negative
(ground).
WARNING: WRONGLY CONNECTED DC POWER CABLE CAN DESTROY YACHT ROUTER THAT CAN VOID THE WARRANTY.
PROVIDE SUFFICIENT POWER SUPPLY. INSUFFICIENT POWER SUPPLY WILL REPEATEDLY RESET AND DAMAGE YACHT
ROUTER THAT CAN VOID THE WARRANTY.
