LockNet Security Doors
Document Part # 14003524 (Rev 021919)
Page 4 of 5
III.
PROGRAMMING
Programming is the process of setting the access code and access time. The access time is
normally set to 6 seconds. The access code may be any number from three to eight digits in
length. If you experience problems programming, contact LockNet.
A.
A
CCESS
C
ODE
1.
The code is factory set at
“
4-4-4-4
”
.
2.
To change the code, press the PROGRAM button on the control module.
2.
Press “1” then “#” on the keypad.
3.
Enter the new code (4 digits typically) on the keypad.
4.
Press
“#”on the keypad (ends entry).
5.
Press
“
* *
”
on the keypad (returns to normal operation).
6.
Test the new access code by entering it on the keypad and pressing #. The solenoid
should energize to unlock the door for approximately six seconds. After the access
period the door should automatically relock when shut. If necessary, program the access
time (refer to next section B).
B.
A
CCESS
T
IME
1.
On the control module, press the PROGRAM button.
2.
Press “2” then “#” on the keypad.
3.
Enter the access time (two digits, in seconds) “0
-
6” on the keypad.
4.
Press “#” on
the keypad (ends entry).
5.
Press
“
* *
”
on the keypad (returns to normal operation).
6.
Test the release time by entering the access code and pressing #. The solenoid should
energize to unlock the door for approximately six seconds. After the access period the
door should automatically relock when shut.
IV.
COMPLETING WORK
After the labor is complete and the system is tested, complete final paperwork and sign-offs
before leaving the job site.
1.
Test the system to ensure proper operation of all installed components.
2.
Call LockNet to report job completion (after normal business hours you may call LockNet the
following business day).
3.
When you are satisfied, demonstrate the system operation to the store manager.
4.
Turn over all keys to the store manager.
5.
The store manager must sign the installer payment form.
6.
Fax a copy of the sign-off sheet, attn. LockNet Customer Service, to 1-859-887-4958.
7.
Contact LockNet immediately if you have problems completed any step in this section.
