10
7000INST Copyright Lockmasters, Inc. 5/25/11
Position the Front Plate Template continued
Step 5D
– Once the high side of a beveled edge door is established. Loosen the
combination square and position the rule to the vertical plumb line on the inside base
plate template and tighten the combination square. (Figure 3).
Step 5E
– Transfer the vertical level line by flipping the combination square to the other
side of the door and make two marks at the end of the rule approximately 6” apart.
Step 5F
– With the rule positioned on the marks draw the vertical plumb line at least 9”.
This establishes a vertical plumb line on the outside of the door.
Step 6 – Position the front plate template.
Align the vertical and horizontal lines printed on the template where they intersect with
the vertical and horizontal lines drawn on the door. Tape the template to the door with
masking tape. (Figure 4)
LKM7000
Installation
5d - Template - Determining distance of IBP
vertical plumb line.
(Figure 3) ESTABLISH VERTICAL PLUMB LINE
On the IBP template position the combination
square against the vertical plumb line.
5e - Template - Marking vertical plumb line on the
front side of the door
5f - Template - Mark vertical plumb line on the
front of the door.
6 - Template - Front of door vertical and hortizontal
lines marked.
(Figure 4) POSITION FRONT
PLATE TEMPLATE
Align front plate template to
the vertical and horizontal lines
marked on the front of the door.
6 - Template - Taping front plate template to verti
-
cal and horizontal plumb lines.
