SECTION 3.3
12
3.3 Adding an Access Code
While in Programming Mode, select
“1AD”
to add an
Access Code.
If you
are not in
Programming Mode,
please see
Section 3.2
to enter
Program-
ming Mode.
After pressing
“1AD”
press
“Pd”
to add an Access Code.
Enter your new
6 - 8 digit Access Code
and press when you are finished.
You will then re-enter the code to confirm
your new
Access Code.
Remember, just touch the digit you need
within the circle around each 3 numbers.
There is no need to touch the exact
location of the number. For example,
based on the example image to the left, if
you need
“1”,
you can touch the
upper
left
button or the
lower right
button. For
“6”,
you would touch the upper right
button.
