SECTION 3.5
16
3.5 Checking the Access Codes
While in
Programming Mode,
select
“3CH”
to check registered
Access Codes.
If you are not in
Programming Mode,
please see
Section 3.2
to enter
Program-
ming Mode.
Active
Access Codes
will then be displayed on the screen in sequence from
left
to right, top to bottom.
In the example shown on the left, the
Access Code
displayed is
1 3 5 7 9 0 .
OK Button
Rotate through the different
Access Codes
by touching
any number
on the screen.
To exit
Check Access Code
screen, simply
press
the
OK
button.
If there are no
Access Codes
registered in
your smart lock,
Check Access Code
mode will be invalid. The default
Access
Code
will not be shown on the display
keypad, and you will see the following
screen shown to the left instead.
