5
Lockset ships default for RIGHT IN-SWING or LEFT OUT-SWING DOORS. Skip this procedure if
your door orientation is as stated. See Step 1 to determine your door opening direction.
Follow the step by step direction to adjust the lockset for LEFT IN-SWING or RIGHT
OUT-SWING DOORS.
Follow the below steps if you're installing ATHENA SWING EDITION with model and
backset size: PGMB118 1 1/8"
(
28mm
)
, PGMB138 1 3/8"
(
35mm), PGMB158
1 5/8"
(
40mm), PGMB134 1 3/4"
(
45mm), PGMB238 2 3/8"
(
60mm
)
NOTE:
If you're installing a Slide Edition skip this step and proceed to
Step 3.
If you're installing a Multi-Point Lockset for a Swing Edition, see next page to adjust the latch throw.
ADJUSTING THE LATCH THROW
Step 2
For your reference, a fully reversed
latch throw is shown.
Position and hold the lockset
as shown.
Move the metal barrier to
loosen the latch throw
Push the latch throw inside the lockset body.
Rotate the latch throw 180 degrees and
let the throw to fully extend out from the
lockset after rotation.
1
2
4
3
5
1
2
3
5
4