3
www.Lock4Safe.com
Technical Manual – TouchManager
• Prepare the mounting and cable /spindle holes
on the safe door.
• Deburr the cable hole well so that the cable can
cannot be damaged.
• Remove the back panel from the Dallas terminal,
align it on the safe and tighten it with the
M4 countersunk screws.
The Dallas terminal is supplied with two M4 countersunk screws
(Imperial 8-32 UNC screws are also available on request) and two M3 screws.
1
Mounting
• Feed the cable through the hole.
• Hook the Dallas terminal onto the mounted back
panel.
• Turn the emergency battery protection clockwise
downwards and affix the terminal to the back panel
with the M3 screws supplied.
2
Insert the Dallas terminal cable into the lock connector “1” or “ENT” and the power supply interface
into the lock connector “2” or “BAT” connector.
T4000 Model
T4000/M Model
T4001/M Model
