ATTENTIONS
1234567890
1234567890
18838:00722
Card number in the back of the card
Example of the card
The last 8-digit number of 1234567890 is 34567890.
125KHz(EM)
Card number
1.Power Supply requirement: DC 12V 500mA and above.
2.Door opening or alarm connector output: Maximum load of 1A@30VDC or
3A@24VDC.(Page
)
Connect with external RELAY to control higher voltage or current .
3.Electric Lock: Fail-safe or fail-secure type (Refer to p
).
Please note: In order to protect the proximity unit, please connect one Diode
between two power supply connectors of electric lock to absorb surge.
4.Avoid installing the unit at the following environment: A. Machines with the same
frequency as the proximity unit around the neighborhood. B. In the area of a base
station with radio or wireless transmission. C. On metal wall (proximity distance will
be shorten).
5.It is suggested to separate the power supply of electric lock and proximity unit in order
to stabalize the power supply.
6.It is IP65 waterproof and its surface is completely waterproof. Please apply waterproof
silicone on its base if it is mounted on rough surface to make sure its base is waterproof.
15
13
Chip serial number
(non-serial)
Card number
(serial)
+
Electric lock
Diode
Electric Locks
13.56MHz(MIFARE)
24AWG
Wires
#
*
#
*
#
*
Wall
Too close
Too close
Sharing the same
power supply
Proximity distance
becomes short
Metal
X
X
X
DC 12V
X
X
~
~
AC
Communication wire
500mA
Power supply
DC 12V
1
Lock Control -
Kouterbaan 63
- 1840 Malderen - Belgium - Tel. +32 52 57 43 02 - [email protected] - www.lockcontrol.be
