6
LCN-SHS
Installation guide
Local Control Network - building controls in perfection
In the menus and help texts found in the programme LCN-PRO, further informations and
properties of the module are available.
Without parameterization the module has no functions.
Because no access to the module is required when first programming, (no programming
button, all functions are controlled over the bus), the module may be installed before being
setting up. In this case the serial number of the unprogrammed module should be noted in
the building plan, for better identification.
Despite its extensive functionalities, the LCN system is simple to install and programme: It´s
all in the hands of the electrician. However a
training course is necessary for every
electrician,
who installs this system. The direct users support over the telephone hotline,
is only free of charge and open to installers who have taken part in a training course.
Important note:
®
