5
LCN-SHS
Installation guide
Local Control Network - building controls in perfection
Status display of the lamps
nr. of flashes
message
normal operation
self testing-error, module is not programmed
bus error: module cannot send
(reserved)
module is in programming mode
nr. of flashes
message
key was pressed, command was sent
different errors: please check with PC and the LCN-PRO
received telegram data was faulty
IR-telegram received from unauthorised sender
received illegal command (will be ignored)
error in the structure of a received command
parameter of a command exceeds permitted limit
command received cannot be carried out at the moment
periphery (T-,I-connection) was overloaded and/or
short circuited. Both LED´s left and right side of the T-connection,
show switch and dimming conditions of the outputs.
GREEN
(flashes constantly):
1
2
3
4
5
RED
(flashes only when occurances are entered):
1
2
3
4
5
6
7
8
cyclic
(30s.)
®
