䠍䠎
䠍
ᾅ
ᵮᶐᶃᶁᵿᶓᶒᶇᶍᶌᶑᴾᶕᶆᶃᶌᴾᶓᶑᶇᶌᶅᴾᶒᶆᶃᴾᵮᶌᶃᶓᶋᵿᶒᶇᶁᴾᶐᶇᶔᶃᶒᴾᶌᶓᶒᴾᶑᶃᶒᶒᶃᶐ
ᵵᶍᶐᶌᴾᶍᶐᴾᶂᵿᶋᵿᶅᶃᶂᴾᶒᶆᶐᶃᵿᶂᶑᴾᶇᶌᴾᶒᶆᶃᴾᶑᶁᶐᶃᶕᴾᶋᵿᶌᶂᶐᶃᶊᴾᵆᶋᵿᶌᶂᶐᶃᶊᵇᴾᶎᶐᶃᶔᶃᶌᶒᶑᴾᶎᶐᶍᶎᶃᶐᴾᶓᶑᶃᵌ
ᵮᵿᶗᴾᶁᶊᶍᶑᶃᴾᵿᶒᶒᶃᶌᶒᶇᶍᶌᴾᶒᶍᴾᵫᵑᴾᶒᶍᴾᵫᵓᴾᶋᵿᶌᶂᶐᶃᶊᶑᵊᴾᶑᶇᶌᶁᶃᴾᶒᶆᶃᶗᴾᵿᶐᶃᴾᶒᶆᶇᶌᴾᵿᶌᶂᴾᶔᶓᶊᶌᶃᶐᵿᶀᶊᶃᴾᶒᶍᴾᶂᵿᶋᵿᶅᶃᵌ
ᵭᶀᶑᶃᶐᶔᶃᴾᶒᶆᶃᴾᶄᶍᶊᶊᶍᶕᶇᶌᶅᵌ
Ⅎ‒⁅⁝⁗‒⁙⁗⁓⁞‒⁛‒⁗⁕⁗‒⁘‒⁚⁗‒⁓⁛⁓⁗‒⁞⁗⁗⁞‒⁞⁗⁓⁖‒‒⁓‒⁗⁕⁗⁛⁗‒⁝⁗†
䋻
Blind rivet nuts (hereafter called “nuts”) have each an appropriate stroke, depending on the
manufacturer, material, and size. Refer to the instruction manual and setting stroke list attached
to the purchased nuts. If you cannot find the appropriate stroke, contact the nut manufacturer
to find the appropriate stroke.
ṟ ᵳᶑᶃᴾᶒᶆᶃᴾᶌᶍᶑᶃᶎᶇᶃᶁᶃᴾᵿᶎᶎᶐᶍᶎᶐᶇᵿᶒᶃᴾᶄᶍᶐᴾᶒᶆᶃᴾᶋᵿᶌᶂᶐᶃᶊᴾᶑᶇᶘᶃᵌ
䋻
Use of an excessively large mandrel prevents appropriate riveting.
Ṡ ᵪᶓᶀᶐᶇᶁᵿᶒᶃᴾᶒᶆᶃᴾᶒᶆᶐᶃᵿᶂᴾᶎᵿᶐᶒᴾᶍᶄᴾᶒᶆᶃᴾᶋᵿᶌᶂᶐᶃᶊᴾᵿᶄᶒᶃᶐᴾᶃᶔᶃᶐᶗᴾᵐᵎᵋᵑᵎᴾᶎᶁᶑᵌᴾᶌᶓᶒᶑᴾᶆᵿᶔᶃᴾᶀᶃᶃᶌᴾᶑᶃᶒᵌ
ṡ ᵵᶆᶃᶌᴾᶐᶇᶔᶃᶒᶇᶌᶅᵊᴾᶎᶐᶃᶔᶃᶌᶒᴾᶒᶆᶃᴾᶋᵿᶌᶂᶐᶃᶊᴾᶄᶐᶍᶋᴾᶇᶌᶒᶃᶐᶄᶃᶐᶇᶌᶅᴾᶕᶇᶒᶆᴾᶒᶆᶃᴾᶕᶍᶐᶉᶎᶇᶃᶁᶃᵌ
Ṣ ᵮᵿᶗᴾᵿᶒᶒᶃᶌᶒᶇᶍᶌᴾᶌᶍᶒᴾᶒᶍᴾᶂᵿᶋᵿᶅᶃᴾᶒᶆᶃᴾᶋᵿᶌᶂᶐᶃᶊᴾᶒᶆᶐᶃᵿᶂᶑᴾᶕᶆᶃᶌᴾᶑᶒᶍᶐᶇᶌᶅᴾᶒᶆᶃᴾᶒᶍᶍᶊᵌ
䋻㻌
Thinning, deformation, and burrs on the threads may prevent proper riveting.
ṣ ᵪᶍᵿᶂᴾᶒᶆᶃᴾᶌᶓᶒᴾᶓᶌᶒᶇᶊᴾᶇᶒᴾᶒᶍᶓᶁᶆᶃᶑᴾᶒᶆᶃᴾᶌᶍᶑᶃᶎᶇᶃᶁᶃᵌ
䋻
Gapping between the nut and nosepiece may prevent appropriate riveting, leading to degraded
setting torque and deformation of the workpiece, as well as damage to the mandrel threads.
Ṩᴾᵩᶃᶃᶎᴾᶒᶆᶃᴾᶎᶌᶃᶓᶋᵿᶒᶇᶁᴾᶐᶇᶔᶃᶒᴾᶌᶓᶒᴾᶑᶃᶒᶒᶃᶐᴾᶇᶌᴾᵿᴾᶔᶃᶐᶒᶇᶁᵿᶊᴾᶎᶍᶑᶒᶓᶐᶃᴾᶕᶆᶇᶊᶃᴾᶓᶑᶇᶌᶅᴾᶇᶒᵌ
䋻
Other postures may cause slanted nuts or damage to the mandrel.
Ṥ ᵢᶍᴾᶌᶍᶒᴾᶑᶃᶒᴾᶒᶆᶃᴾᶌᶓᶒᴾᵿᶅᵿᶇᶌᴾᶕᶆᶇᶁᶆᴾᶆᵿᶑᴾᵿᶊᶐᶃᵿᶂᶗᴾᶀᶃᶃᶌᴾᶓᶑᶃᶂᵌ
䋻
Setting the nut again which has already been used applies
a heavy burden on the nut and mandrel. In a worst case
scenario, it may be impossible to remove the nut from the
mandrel.
Ṧ ᵡᶆᶃᶁᶉᴾᶄᶍᶐᴾᶄᶊᵿᶕᶑᴾᶇᶌᴾᶒᶆᶃᴾᶌᶓᶒᶑᴾᵿᶌᶂᴾᶑᶓᶐᶐᶍᶓᶌᶂᶇᶌᶅᶑᴾᶑᶓᶁᶆᴾᵿᶑᴾᶎᶐᶃᶎᵿᶐᶃᶂᴾᶆᶍᶊᶃᶑᴾᵿᶌᶂᴾᶎᶊᵿᶒᶃᴾᶒᶆᶇᶁᶉᶌᶃᶑᶑᵌ
䋻
Some nuts with thread flaws may not be set normally.
ṧ ᵷᶍᶓᴾᶁᵿᶌᶌᶍᶒᴾᶍᶎᶃᶐᵿᶒᶃᴾᶒᶆᶃᴾᶒᶍᶍᶊᴾᶁᶍᶌᶒᶇᶌᶓᶍᶓᶑᶊᶗᴾᶀᶗᴾᶉᶃᶃᶎᶇᶌᶅᴾᶒᶆᶃᴾᶑᶕᶇᶒᶁᶆᴾᶎᶓᶊᶊᶃᶂᵌᴾᵰᶃᶊᶃᵿᶑᶃᴾᶒᶆᶃ
ᴾᴾᴾᴾᶑᶕᶇᶒᶁᶆᴾᶀᶃᶄᶍᶐᶃᴾᶑᶒᵿᶐᶒᶇᶌᶅᴾᶒᶆᶃᴾᶌᶃᶖᶒᴾᶍᶎᶃᶐᵿᶒᶇᶍᶌᵌ
Reverse
button
ṥ ᵬᶃᶔᶃᶐᴾᶎᶓᶊᶊᴾᶒᶆᶃᴾᶑᶕᶇᶒᶁᶆᴾᵿᶅᵿᶇᶌᴾᶍᶌᶁᶃᴾᶗᶍᶓᴾᶐᶃᶊᶃᵿᶑᶃᴾᶇᶒᴾᶕᶆᶇᶊᶃ
ᴾᴾᴾᴾᶕᶍᶐᶉᶇᶌᶅᵌ
䋻㻌
Push the reverse button. The mandrel rotates in reverse
and releases the workpiece.
ᒍᛖᾔ
ᾝ
ᾖ
ᾛᾘ
ᾢ
ᾗ
