#&,756/'06
Measurement of the rivet nut
Measure the rivet nut after riveting.
Repeat steps
to
until the stroke becomes ±0.3 mm of the appropriate stroke.
䈜
To operate the air motor smoothly, lubricate with
3 - 5 drops of LOBSTER hydraulic oil “B10012”
(optional) from the air coupler before starting work.
ᾄ
ᾅ
䠍䠍
Subtracting the overall length of the rivet
nut after riveting measured in this step 5
from that measured in the step 2 obtains
the actual stroke.
ᾁ
ᾄ
Rivet nut
ᒍᛖᾔ
ᾝ
ᾖ
ᾛᾘ
ᾢ
ᾗ
Riveting >>
Removal
Keep pulling the switch until the rivet is
set and removed.
By pulling the switch the screw mandrel
goes backward and the rivet nut is set.
Maintaining the switch in the pulled
position automatically rotates the screw
mandrel in reverse, which allows the rivet
nut to be removed. Releasing the switch
stops the screw mandrel from rotating in
reverse.
Switch
ᵏ
ᾅ
Completion of rivet nut loading
When the rivet nut comes in contact with
the nosepiece after it has been loaded,
the clutch operates and a continuous
clicking sound is emitted. Release the
rivet nut.
Be sure to load the rivet nut until the
clutch operates. Failure to contact the
nosepiece causes incomplete riveting.
Nosepiece
ᾃ
No gap
