Phone: 800.526.4041
Fax: 818.764.6061
Replacing and Installing a Arc Gear on the Platform.
Repair Instructions
Step 3.)
Put the Battery Negative Ground Loop over
the threads of the ½ inch platform bolt, and cap it off
with the bolt.
Step 4.)
Tighten the nut and yoke bolt until the nut
can be turned by your thumb and index finger.
*
If the platform bolt is tightened too much, this can
cause a Feedback or Overcurrent Sweep Motor
Error.
The threading is pointed out
in blue, and the Battery
negative Ground Loop is
orange.
5
Re-attaching The Case
Step 1.)
Lift the red case and lower until it is covering
the whole Chassis of the machine.
Step 2.)
Screw the (6) Philips-head screws along the
bottom of the red case where it attaches to the chassis
of the machine. (2-front, 2-rear, one on each side)
Case Removed
Case Screws (Front & Rear)
Case Screws (Side)
How to Order Elite Replacement Parts
Elite Parts
Website:
http://www.lobstersports.com
Email:
Phone:
800.526.4041
Fax:
818.764.6061
We accept Visa, MasterCard or Discover & PayPal
For Elite 4- Elite 5LE: