11
Assembling break into Hand Pallet truck
1. Unscrew the screw pin of the
break
2. Use a hammer and pin driver to
remove spring pin at the steering
wheel (part No. 23)
3. Remove the wheels (Part No. 26)
and the steering wheel axis (Part
No. 21)out of the hand pallet truck
4. Lift the whole hand pallet truck up
and assemble the break into the
pump body (Part No. 15)
5. Let the steering wheel axis (Part
No.21) go through the hole of the
pump body (Part No. 15) and the
hole of the break
6. Screw in the screw pin of the
break to make sure that the beak
and the steering wheel axis (Part
No. 21) are totally connected to
the pump axis.
7. Assemble the two steering wheels
(Part No. 26) back into the wheel
shaft
8. Use hammer to place the spring
pin (Part No. 23) into the holes.
9. Screw in or out the screw pin to
have a good distance between the
wheels and the break.
10. Press “LOCK” to break a hand
pallet truck. Press “MOVE” before
using or moving hand pallet truck
Summary of Contents for XTN 540-1150
Page 13: ...13 ...
