Loadrite Sprint User Manual Download Page 20

Page: 20 / 36

5-18

LOADRITE Sprint User manual

5.1. SETUP...

The

Install Menu

provides options for configuring the LOADRITE Indicator at installation. A security code is required to access

this menu.



For further information, contact your LOADRITE distributor.

5.2. AUTO-ADD

Controls whether or not the

Auto-Add

functionality is enabled.



Select

either

Off

, then press

5.3. SCALE

The Scale options are only available if Multiple Scales functionality has been enabled during installation.

This option enables the use of different load bearing implements (for example, bucket or forks) on the loader. The operator
needs to select the correct scale for the attached implement.

TIP:

You should perform a

Check Zero

after changing the attachment.

5.4. MODULE

The Module option is only available if a LOADRITE Data Module is connected to the Indicator and

Data Logger functionality has been correctly configured during installation.

The

Data Module Menu

provides functionality for use with LOADRITE Data Modules.

The following menu items are available:

Option

Description

Property

Lists the properties of the Data Module.

Backup

Saves the product list and data lists to the Data Module.

Restore

Uploads data stored on the Data Module to the LOADRITE Indicator. This can be used to
share data between Indicators.

Summary of Contents for Sprint





































Search results

Summary of Contents for Sprint

Reviews:

Related manuals for Sprint

Brands by name

Popular brands

Loadrite Sprint, User Manual

Search results

Summary of Contents for Sprint

Reviews:

Related manuals for Sprint

Brands by name

Popular brands